Why Fiberglass Rods Degrade Outdoors in 2026
Fiberglass rods shouldn't lose their performance just because they're installed outside. Yet that's exactly what happens far too often when material selection and manufacturing quality aren't matched to outdoor conditions.
What is Peel Ply?
If you’ve ever laid up fiberglass or carbon fiber and then faced hours of sanding just to get a surface ready for bonding or paint, you know the pain.
How Stress Corrosion Cracking Causes FRP Rod Failure
Stress corrosion cracking (SCC) is one of the most destructive failure modes affecting pultruded fiberglass rods in outdoor environments. Unlike sudden impact damage, SCC develops gradually as moisture, chemicals, and sustained mechanical loads work...
What Causes Fiberglass Rods to Fail Prematurely
Fiberglass rods are known for their durability, high strength-to-weight ratio, and excellent performance in harsh environments. Yet even the most robust pultruded FRP components can break down earlier than expected when specific factors go...
9 Outdoor Factors That Degrade Fiberglass Rods
Pultruded fiberglass rods can last for decades—when you protect them from the right threats. But outdoor environments throw everything they have at composite materials: sun, rain, salt, heat, and mechanical wear.
Recent posts
Maintaining Quality Control in High Volume Manufacturing Design
In an age of swift technological progress and increasingly complex market demands, industries are leveraging advanced manufacturing methods to streamline processes and enhance output.
Supply Chain Optimization for Manufacturing Design Engineers
The realm of supply chain efficiency, once relegated to logistics and operations, is fast becoming a must-have facet in the toolkit of modern design engineers. A well-optimized supply chain...
A Comprehensive Guide to Design for Manufacturing (DFM) Best Practices
In an era where efficiency and cost-effectiveness are the twin engines driving the manufacturing industry, Design for Manufacturing (DFM) has emerged as a key strategy to optimize both.
Computational Fluid Dynamics (CFD) in Product Design: Incorporating FRP
In the ever-evolving world of product design, Computational Fluid Dynamics (CFD) has become an indispensable tool for engineers seeking to optimize their creations.
Implementing Sustainable Design Principles and How FRP can Help
Sustainability has become a crucial aspect of modern manufacturing as industries worldwide recognize the need to reduce their environmental impacts and preserve resources for future...
Lightweighting Techniques for Improved Manufacturing and Performance
Lightweighting has become a key strategy in modern manufacturing, driven by the growing demand for energy-efficient, high-performance, and environmentally friendly products.
Growing Trend of Mass Customization: Manufacturing Design Engineering
In the ever-evolving landscape of manufacturing design engineering, one trend is swiftly gaining momentum and transforming the industry at an unprecedented scale: Mass Customization.
The Benefits of Modular Design in Manufacturing
In the dynamic world of modern manufacturing, efficiency, scalability, and adaptability have emerged as crucial elements to drive success and competitive edge.
Optimizing Material Selection for Product Design Engineers
Material selection is a critical aspect of product design, as it directly influences the performance, cost, and sustainability of the final product.
Enhancing the Fatigue Life of FRP Structures through Design Optimization
Fiber-Reinforced Polymer (FRP) materials have revolutionized engineering with their unique combination of high strength, low weight, and corrosion resistance.
Browse Posts
- June 2026
- May 2026
- April 2026
- March 2026
- February 2026
- January 2026
- December 2025
- November 2025
- October 2025
- September 2025
- August 2025
- July 2025
- June 2025
- May 2025
- April 2025
- March 2025
- February 2025
- January 2025
- December 2024
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
Tencom
Everybody says so, yet in the end, it's not what is said but how it performs. Tencom products perform and we stand behind each and every single one we manufacture.
Stated simply, Tencom has only one reason for being, which is "TO SERVE CUSTOMER NEEDS".
Our goal is the right product at the right time at the right price.
