Fire-Retardant Resins for Data Centers, Transit, and Occupied Buildings
Standard polyester and vinyl ester pultrusions burn. In a data hall, a transit station, or an occupied building, that is not acceptable.
Thermoplastic Pultrusion: What Engineers Should Know Before Specifying It
Interest in thermoplastic pultrusion keeps rising. Engineers hear about recyclability, toughness, and the ability to remelt a profile after it leaves the line.
What Causes Fiberglass Tube Fatigue in 2026
Your fiberglass tubes should last decades. But when cyclic loads, environmental exposure, and material mismatches converge, fatigue can quietly erode the structural performance you're counting on. Understanding what drives fiberglass tube fatigue...
Pultruded Fiberglass in Agricultural Support Systems
Most people still picture a green rod next to a young maple when they hear “fiberglass stake.” That product matters. It is also only the starting point.
How Outdoor Exposure Breaks Down Fiberglass Rods
Fiberglass rods should hold their strength for decades after installation. Yet outdoor environments attack these composites through three interconnected degradation mechanisms that many purchasing managers and engineers don't fully account for when...
Recent posts
Harnessing the Strength & Flexibility of FRP in Busbar Insulator Design
Busbar insulators, often overlooked but pivotal components in electrical engineering, serve as the backbone for safe and efficient power distribution.
Fiberglass Pultrusion: Revolutionizing the Automotive Industry
The automotive industry is constantly seeking ways to improve efficiency, reduce emissions, and enhance performance. One emerging technology that is gaining traction in this pursuit is...
GFRTP Rebar: Shaping the Future of Construction
In the world of bridge and highway construction, the use of Fiberglass Reinforced Polymer (FRP) rebar has gained traction due to its strength, light weight, and corrosion resistance.
Exploring Electric Fences: Insights into FRP for Electric Fence Poles
Electric fences are barriers that use electric shocks to deter animals or people from crossing a boundary.
Pioneering Thermoplastic Pultrusion - Emerging Capabilities
Pultrusion, a manufacturing method for producing continuous lengths of composite material, was first introduced in the 1950s.
10 R-Based Manufacturing Approaches for Sustainable Manufacturing
In an era marked by rapid technological advancements and increasing consumer demand, the manufacturing sector faces unprecedented challenges.
Browse Posts
- October 2026
- September 2026
- August 2026
- July 2026
- June 2026
- May 2026
- April 2026
- March 2026
- February 2026
- January 2026
- December 2025
- November 2025
- October 2025
- September 2025
- August 2025
- July 2025
- June 2025
- May 2025
- April 2025
- March 2025
- February 2025
- January 2025
- December 2024
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
Tencom
Everybody says so, yet in the end, it's not what is said but how it performs. Tencom products perform and we stand behind each and every single one we manufacture.
Stated simply, Tencom has only one reason for being, which is "TO SERVE CUSTOMER NEEDS".
Our goal is the right product at the right time at the right price.
