Why Fiberglass Rods Degrade Outdoors in 2026
Fiberglass rods shouldn't lose their performance just because they're installed outside. Yet that's exactly what happens far too often when material selection and manufacturing quality aren't matched to outdoor conditions.
What is Peel Ply?
If you’ve ever laid up fiberglass or carbon fiber and then faced hours of sanding just to get a surface ready for bonding or paint, you know the pain.
How Stress Corrosion Cracking Causes FRP Rod Failure
Stress corrosion cracking (SCC) is one of the most destructive failure modes affecting pultruded fiberglass rods in outdoor environments. Unlike sudden impact damage, SCC develops gradually as moisture, chemicals, and sustained mechanical loads work...
What Causes Fiberglass Rods to Fail Prematurely
Fiberglass rods are known for their durability, high strength-to-weight ratio, and excellent performance in harsh environments. Yet even the most robust pultruded FRP components can break down earlier than expected when specific factors go...
9 Outdoor Factors That Degrade Fiberglass Rods
Pultruded fiberglass rods can last for decades—when you protect them from the right threats. But outdoor environments throw everything they have at composite materials: sun, rain, salt, heat, and mechanical wear.
Recent posts
How FRP is Made: Steps to Making Fiberglass Reinforced Polymer
Fiberglass-reinforced plastic (FRP), also referred to as fiber-reinforced polymer, is a composite material renowned for its high strength, lightweight properties, and exceptional corrosion...
Pultrusion and the Quest for Green Manufacturing
Limiting the environmental impact of materials and manufacturing is a key priority worldwide. Can pultrusion be an eco-friendly manufacturing choice for energy, transportation, and...
The Pultrusion Manufacturing Process - What is it?
Pultrusion refers to a continuous or uninterrupted process that utilizes fiber reinforcements or other resin matrices to produce cross-sectional materials. Pultrusion is a combination of...
The Worldwide Pultrusion Revolution
According to the European Pultrusion Technology Association (EPTA), more architects and engineers are discovering the benefits of pultrusion and incorporating pultrusions into construction...
The Unique Capabilities and Benefits of Pultruded Products
Pultruded products are becoming a staple of the global manufacturing economy, and pultrusion is now one preferred form of manufacture of composite parts for thousands of products in key...
What You Should Expect with Custom Pultrusions
Custom pultrusions offer significant advantages for entrepreneurs and engineers seeking high-performance, fiber-reinforced polymer (FRP) components. When properly implemented through...
Fiberglass Pultrusion Product Features and Benefits
When it comes to your project, pultruded fiberglass is just as good as any other product on the market, right? Absolutely not! Compared to a wide range of other materials, fiberglass...
Pultrusion vs Extrusion: A Cross-Sectional Analysis
When Tencom evaluates manufacturing options, the choice is always made with the customer in mind. Low cost, low weight, high strength, and versatility are of paramount importance to our...
Browse Posts
- June 2026
- May 2026
- April 2026
- March 2026
- February 2026
- January 2026
- December 2025
- November 2025
- October 2025
- September 2025
- August 2025
- July 2025
- June 2025
- May 2025
- April 2025
- March 2025
- February 2025
- January 2025
- December 2024
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
Tencom
Everybody says so, yet in the end, it's not what is said but how it performs. Tencom products perform and we stand behind each and every single one we manufacture.
Stated simply, Tencom has only one reason for being, which is "TO SERVE CUSTOMER NEEDS".
Our goal is the right product at the right time at the right price.
